Type 11A

¿ Porqué Type 11A ?

  • Great for low ceiling heights
  • Aesthetically pleasing installation

Dibujos suspension Type 11A

Descarga el “Juego completo” o “Dibujos individuales para proyectos de ingeniería".

Juego completo de dibujos

Descarga toda la colección de los dibujos de la suspensión Tipo 11A

PDF set: pdf (6MB) Guia de instalación
(5MB) Para presentación
(32MB) Para presentación
(10MB) Para proyectos de ingeniería
(10MB) Para proyectos de ingeniería

Type 11a is a variation of our Type 11 T-rail suspension, ideal for low ceilings. It is supreme for straight sections of D shaped ducts and differs from Type 11 in that it is a keter type bulb edge, which is pulled into place, creating a beautiful, uniform suspension with a nice closing. The T-rail, so named because it looks like a T in the cross section, is made out of anodized aluminum, making it an excellent choice for corrosive environments. Two T-rails are fixed to a hard ceiling and the duct is then suspended from the rails. The duct will have a keter type bulb edge at the 3 and 9 o'clock positions. The height of the bulb edge above the duct can be manufactured to specification.


Eenvoudige installatie

Los sistemas de dispersión FabricAir son intuitivos y fáciles de instalar. Cada sección del conducto viene marcada con una etiqueta individual, lo que le permite saber el lugar exacto de cada...

Read more


T-rail is found in four of the standard suspension methods offered by FabricAir (Types 3 + 4 and types 11 + 12). T-rail is produced in 2 meter sections using an extrusion process and...

Read more