FabricAir Poly
FabricAir® Poly es un material textil rentable e impermeable disponible, únicamente, en color blanco.
Es el producto ideal para aplicaciones industriales pesadas a la hora de distribuir aire caliente o isotérmico a través de OriFlow™.
FabricAir® Poly cuenta con una garantía de 1 año.

It is a non-permeable fabric, mainly used in heavy industrial installations for distributing isothermal or heated air.


FabricAir round duct is the most commonly used duct profile and is typically found in open ceiling applications. The duct diameter can be made as small or as big as required.

The Circle Section duct can be used when there is a hard ceiling to attach to. Typically this profile is used when there is not enough head room to allow for the use of a Half-round duct. 

Flow models



OriFlowTM is a directional flow model where the air exits the duct via rows of laser cut orifices. Multiple rows of OriFlowTM can be specified for a duct. The throw depends on the static pressure inside the duct, the size, and spacing of the orifices.

Data sheet


Fabric type:
180  g/m²
0,187 [0.0073]  mm [inch] EN ISO 5084:1996 (ASTM D1777-96)
0  (±5%) m³/m²/h at 120 Pa
0  (±5%) [CFM/ft² at 0.5” Static]EN ISO 9237:1995 (ASTM D737, Frazier)


Strength - Warp:
850  N EN ISO 13934-1
Strength - Weft:
850   N EN ISO 13934-1
- % Max. °C [°F] EN ISO 5077


Code Compliance

ULC S102.2:

Performance certificates

Additional Approvals

All-in-One available:

FabricAir® believes that all data, statements, technical information, etc., listed in this Technical Data Sheet regarding the product and the use of the product are accurate and reliable. However, the product will only be covered by FabricAir®’s guarantees or warranty if the final use for the product has been approved by FabricAir® in writing. No representative is authorized to approve the final use of the product on behalf of FabricAir®.

Variations of the fabric

Permeable Flame Retardancy Antistatic Anti-microbial Warranty
  Poly 1

Certificate comparison